TMLogo.JPG
YOU ARE HERE:  Home  >  Product Line  >  Thread Trimming Stations
Model A/B - bring small or lightweight items to the clipper for trimming
•  Clipper can be mounted horizontally (Model A) or vertically (Model B) for trimming thread waste
•  Large waste-box with see-through door reduces maintenance interruptions in production
•  Can be built with two clippers
Size: 40” high x 42” wide 16” deep
Weight: 160 pounds (73kg)
Shipping weight:  225 pounds (102kg)
Electrical:  110 Volts or 220 Volts, 50/60 Hz, 1 phase
ModelAHorzClipper.jpg
ModelB2clippers.jpg
Model A2/B2 with two clipperrs
Model CT - reduce the handling of heavy or bulky items
Over 600 combinations of blade and nosepiece are available to adapt the clipper to your trimming application
ModelCT.jpg
•  Adjust the work surface for height and tilt to provide optimum working conditions for the operator
•  Suspended, light-weight clipper increases freedom of movement in trimming large items
Size: base cabinet: 28” wide x 16” deep x 31”
(71cm x 41cm x 79cm), cable: 72” (18cm)
Electrical: 110 Volts or 220 Volts, 50/60 Hz, 1 phase
ModelF.jpg
Model F - reduces non-value added labor of pant turning
•  Trim inside, turn and trim outside and inspect pants in one cost-saving operation
•  Four sizes of trouser form, all swivel 180°
Size: Unit with pant form in place: 71” deep (180cm)
Electrical: 110 or 220 Volts, 60 Hz, single-phase standard
Model G - designed for trimming large or bulky items
ModelG.jpg
•  Large (24” x 60”) work surface can acommodate coats, trousers or other large pieces
•  Clipper drive motor and clipper suspension are mounted overhead, keeping the large work surface clear for thread trimming
Size: base cabinet: 28” wide x 16” deep x 31” high   (71cm x 41cm x 79cm)
Electrical: 110 Volts,60 Hz, single-phase
Model SS - designed for vertical inspection and trimming
Home        Product Line        About Us/Contact Us
- a veteran-owned, small business -
4860 5th Street Highway  •  Temple, PA 19560  USA
Phone  610.921.0203  •  FAX  610.929.8833  •  Toll free  800.356.4237
ModelSS.jpg
•  Air-operated  holding clamps, mounted on the vertical work surface, free the operator to trim anad examine large pieces quickly and efficiently
•  Both the height and tilt of the work surface can be adjusted without tools or a mechanic’s assistance
Size: 20” long x 32” wide x 80” high (51cm x 81cm x 293cm)
Electrical: 110/220 Volts,50/60 Hz, s1 phase standard
Air: compressed air at 80 PSI for footswitch
 Thread Trimming Stations