TRIMMASTER
EMX Series Electronic Metering Devices
Three models for three different
applications - all use microcontroller technology to meter
elastic quickly and accurately
Key Advantages of all EMX models
• Unparalled accuracy in metering elastic, lace,
piping or other narrow fabric - ensures good fit and garment
symmetry
• Minimal operator training required - the
microcontroller adjusts tension automatically to compensate for
variations in sewing machine speed
• Retains settings if the power is off or
interrupted
•Tension
settings are entered easily and displayed clearly on a backlit,
liquid crystal display
• Energy-saving power circuitry conserves
electricity
• Mounts and operates easily on most sewing
machines, using a clutch or certain electronic motors
The EMX-1 stores up to 45 different tension settings
Includes: EMX
control box, synchronizer, metering mechanism with a 60
ounce-inch motor and 3” rollers, mounting hardware, power
cord
Electrical: 110
or 220 Volts, single-phase, 50/60 Hz, .5 amps. Patch cords are
available for certain electronic motors
Mount the standard metering mechanism on
top, bottom or side to feed elastic, tape or other narrow
fabric up to 3” wide
Reduce narrow fabric waste with the EMX-2
• Coordinates
the operation of other attachments with your metering device
using the same easy-to-program control box.
Includes: EMX
control box, synchronizer, photo eye assembly, metering
mechanism with a 60 ounce-inch motor and rollers (1 1/2”
or 3” standard), mounting hardware and power cord
The EMX-2 is shown here with a PX Cutter
mounted behind the needle
Use the EMX-2 with two outputs to actuate
a cutter and control the sewing machine motor (see right) for
‘cut-and-stop’ savings of narrow fabric
The EMX-3 with spot gathering capabilities provides
the accuracy needed to sew intimate apparel and swimwear
• Can store up to 3 “set-ups”, each
with up to 5 tension steps
•
Program can advance from one tension step to the next
automatically by stitch counting or with a knee switch
• “Advance/pullback”
feature ensures garment symmetry and repeatability. To transfer
rate changes quickly to the needle, the metering mechanism
‘pulls back’ on the elastic for gathering, then
‘advances’ the elastic quickly for flat sewing
The EMX-3 is unique for its ability to
sew absolutely flat as well as gathered
|
The low-profile metering mechanism (shown
right) is designed for use with the EMX-3. It mounts
closely to the machine, giving the operator a clear view of the
needle
TRIMMASTER • 4860 5th
St. Highway, Temple, PA 19560 U.S.A.
Phone: 610-921-0203 •
FAX: 610-929-8833 • Toll free:
800-356-4237
- A
veteran-owned, small business -
