Apparel Making Equipment
Consistently produce a well-formed collar
point with the
Trim-N-Turn or Collar Point Trimmer
• The Trim-N-Turn (left) reduces costs by
combining two steps into one: trimming the collar point and
turning the point right side out to form a clean, sharp collar
point
• The Collar Point Trimmer (right) only trims
excessmaterial between the collar’s sean and edge.
• Offset
placement of the Trim-N-Turn on the table unit greatly reduces
operator fatigue
Includes: unit
with one set of collar trimming knives, chosen from the five
styles shown below. Machine stand optional for Trim-N-Turn
Previously known as: Beattie Collar Point
Trimmer
Collar Point Trimmer
Trim-N-Turn
The following knife styles are standard
for the Trim-N-Turn and Collar Point Trimmer:
The Contour Trimmer adds speed and
acccuracy to collar making
• Trims the collar contour to ensure
accurate collar placement
• Two-button actuation protects the operator
• Compressed air clears the work area after each
cut
• Compatible with woven or knit fabric
• Add the optional notching attachment to
eliminiate a separate notching operation
Includes: unit
with machine stand and customer-specified contour
Size: unit:
34” wide x 21” deep x 15” high, (86cm x 53cm
38cm)
Operation: compressed
air at 80psi (5.5bars)
Optional:
work stand
Contour Trimmer shown mounted on an
optional work stand
Press the collar and fold the shirt in one
operation with either the TrimMaster Form-O-Round or Collar
Foming Shirt Folder
• Heated dies press and shape shirt or blouse
collars while an operator folds and pins the garment
• Thermostatically controlled dies adjustable up to
550° (290°C)
• Many dies styles available, including perfectly
round
Includes: table
with adjustable height legs, mat switch, one customer-specified
die and one folding board
Size: 48” x 24” x 38”, (122cm
x 61cm x 96cm)
Operation: runs
on electricity, 110/ 60/1, 2.2 amps standard. Dies
operate with compressed air at minimum pressure of 80 psi (5.5
bars)
Optional extras: folding arms, supply shelves, 220 Volt
configuration
Shirt folding table shown with optional
storage shelves attached
Heat seal labels or decoration on small
items like socks or scarves
with the TrimMaster Transfer Iron
• Light and easily manipulated for hand-held
applications
• Durable,
long-lasting heating element can withstand the demands of an
industrial, multi-shift operation
• Heat
thermostatically controlled°
• 2” x 4” base standard; 2
3/4” x 6” optional large base
Transfer Iron
TRIMMASTER • 4860
5th St. Highway, Temple, PA 19560 U.S.A.
Phone: 610-921-0203 •
FAX: 610-929-8833 • Toll free:
800-356-4237
- A veteran-owned, small business -